![]() ![]() If all is good then see if you can print from this Mac. Check with the network admin to see if they have been blocked. Also, is there any antivirus installed that may be blocking the request In addition, the Fiery needs to access the following ports: 161and 162 for SNMP and WebTools. You can also press the Settings button to check that your ID / PIN is set and you can verify it works. This chapter provides an introduction to the Fiery WebTools, providing a description of the tools and the procedure for accessing them. If this is a Windows based Fiery, check to see if the Windows Firewall is enabled on the Fiery. Change the print dialog to Special Features and ensure that the Dept ID Management setting is enabled as shown below. With the settings entered press the Save Settings button and then Quit the Canon driver utility. ![]() You will have the option to verify that your ID / PIN is correct and select not to use Dept ID printing when printing in B&W only. Press this to open the Printer Information window that will confirm Dept ID Management is enabled in the copier as shown below.Ĭlick OK to close the Printer Information window and then enable the Dept ID setting and enter your Dept ID and PIN. ![]() With the Canon utility open you will see the Printer Information button. The Fiery server can be restored either from images stored on the. Then select the Utility tab and then Open Printer Utility. Fiery System Restore allows you to backup your Fiery server for quick recovery later. With Dept ID enabled, you need to open Printers & Scanners, select the C5035 printer in the list and then click on Options & Supplies. You will either see a login page for the C50xx or the Fiery Webtools page for the imagePASS. To check if the Fiery is being used, open a web browser and enter the IP address of the C50xx. 38 Canon Business Process Services jobs in Newark. If your C50xx has this fitted then you cannot use the Canon PS or UFR2 driver and need to use the imagePASS-B1 driver. There is an optional print controller known as an imagePASS-B1 (aka Fiery) available for the C50xx series. Reply if this is enabled and I can give you direction on how to configure.Ĥ. With the Dept ID Management enabled, if you print to the C50xx without entering a supporting ID/PIN, then you print job will vanish. If you have to enter an ID/PIN in order to make a copy, then Dept ID management is most likely enabled (although there are 3rd party apps that behave in a similar way so you should check with your IT). No queue name is needed, just the IP address and the C50xx driver in the Use menu.ģ. For both the UFR2 and PS driver, you should use HP Jetdirect-Socket for the Protocol. If installed you will see an entry called PS.Ģ. To check if the PS kit is installed, press the Check Counter button on the C50xx and scroll down a page or two. If the C50xx does not have the Postscript kit activated, then you will have to use the UFR2 driver. You mention downloading all the Mac drivers. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |